Improve the Efficiency of the Connections Between Circular Columns and End-Plate

Document Type : Original Article

Authors

1 civil engineer department - Faculty of Engineering - Menoufia University

2 Civil Engineering, Menoufia University

3 Department of Civil Engineering, Faculty of Engineering, Menoufia University

4 Civil engineering department menofia university

Abstract

This study aims to look into a new low-cost connection that can be readily established on the site. Similarly, to improve the efficiency of the connections and investigate the various variables that influence their capacity. Several studies focused on the behavior of these connections under various types of loads, which led to the discovery of their weak points, the ideal strength method for these connections under various loads, the best method of erection, as well as the cost and the time of construction. In the research's experimental part, a vertical force was applied to three types of connections between a circular column and end plate. The connection was strengthened by filling the column with concrete and welding two circular bars in the tension and compression zones. The tested connections were analysed using a computer program in the numerical analysis section (ANSYS 16). Finite element results were validated with experimental results.

Keywords

ERJ. Engineering Research Journal
Volume 46, Issue 1
issued on 1/1/2023 in 5 Parts: Part (1) Electrical Engineering, Part (2) Mechanical Engineering, Part (3): Production Engineering, Part (4): Civil Engineering, Part (5) Architectural Engineering,
January 2023
Pages 159-169

Files

Share

How to cite

Statistics