This paper presents results, that were obtained after tooling white cast iron in industrial conditions, using the method of casting modifled with composite additions. The additions contained components which were more favourable, and also make prime graphitization difficult. It has reached shortening phase of cast iron graphitization, increase of R, and A5 tooled materials, as also reasonable lowering of fitted materials hardness. The obtained results were verified using a large slenderness ratio, which in connection with the change of liquid delivery method, it liquified on all lenghts of the microshrinkage and gave off prime carbon
Borkowski, S. (2002). THE COMPLEX TOOLING OF CAST IRON FOR LIGHT SECTION CASTINGS. ERJ. Engineering Research Journal, 25(2), 127-134. doi: 10.21608/erjm.2002.70760
MLA
Stanislaw Borkowski. "THE COMPLEX TOOLING OF CAST IRON FOR LIGHT SECTION CASTINGS". ERJ. Engineering Research Journal, 25, 2, 2002, 127-134. doi: 10.21608/erjm.2002.70760
HARVARD
Borkowski, S. (2002). 'THE COMPLEX TOOLING OF CAST IRON FOR LIGHT SECTION CASTINGS', ERJ. Engineering Research Journal, 25(2), pp. 127-134. doi: 10.21608/erjm.2002.70760
VANCOUVER
Borkowski, S. THE COMPLEX TOOLING OF CAST IRON FOR LIGHT SECTION CASTINGS. ERJ. Engineering Research Journal, 2002; 25(2): 127-134. doi: 10.21608/erjm.2002.70760
)
View on SCiNiTO